Industrial supplies made easy by Nasifkhan!

Are you an owner of a small industry? Do you always need some kind of industrial supplies in your industry? If your answer to all these questions is in yes-- then this is the place where you are ought to be. Finding a right company to buy all these products is a very time consuming as well as a tiring job. A lot can be heard in the market about which company to choose and which not to. But the most difficult task is to choose whose views can actually be trusted upon. To make the job easy for you-- here is a list of parameters that should be kept in mind while choosing the one for you:

Price:

The most prominent parameter that should be noted is the amount of money that the company asks for. The price factor is the most important one while choosing the right company. Some provide great quality at a low price while others may charge higher for the same quality. A little amount of negotiation is always advisable before finalising on the deal.

Variety of products:

It is never a good idea to hire different companies for different kind of goods. Why complicate the situation when it can be dealt with in a much more easy way? Suppose you want lifting equipment, general safety tools and fasteners. Choosing different companies for different needs will only increase the workload on your shoulders.

Claim for breakage:

There is no hiding the fact that there are several cases in which the items get broken during the moving phase. In such cases, the company should provide some claim for breakage. A claim contact should be signed beforehand. And the refund or replacement process should quickly be done.

User reviews:

Another important aspect which must be kept in mind while choosing a company is the ratings and reviews of the previous clients. But make sure that the reviews of the previous customers should not be biased in any case. An unbiased set of reviews can prove to be extremely useful in your selection. It tells a great deal about how much trustworthy the company actually is.

Nasif and Khansaheb Abdulhusain bros. WLL is one of the best companies for industrial supplies. It is located in the kingdom of Bahrain. It has offices in many Middle Eastern countries as well. Do visit the link http://www.nasifkhansaheb-bh.com/ for more information.

High Tensile Fasteners And Lifting Equipment In Bahrain

Nasif and KhanSahebAbdulhusein Bros is a Bahrain-Indian joint venture and a leading name in middle-east in Fasteners and Lifting equipment industry. Established in 1985 they have deep-seated foundations in quality materials manufacture and wholesale business and offer the most diverse range of lifting equipment in middle-east. They have made new business partners in the industry for expanding their business and user base across the continent with the same commitment to quality of products and services offered. Their showrooms and warehouses are spread throughout the major industrial areas of Sitara in Bahrain to provide their consumers with all the Industrial needs.

Specific Tools and Equipment Available

-Being one of the Prime distributors in Bahrain, Nasif, and KhanSahib supply to marine companies, Real estate firms along with oil companies with a long list of clients like the Cosby group, Starrett, Devcon, Beargrip tools and Fabory. Most sold products include Lifting tackles, steel wire ropes, Fibre ropes and a variety of industrial fasteners along with industry safety products such as protective gear, hand and power tools and manufacturing grade chemicals and a few more products on client’s request from their alliance with firms in UAE all at an affordable price.

-Other major products include Crosby, Bruntonwolf, Kingtony, Sellstorm, and Parkson with other general safety tools for welding, safety, head protection and workshop tools.

At Nasif and KhanSahebAbdulhusein they realize the importance of top-notch lifting and rigging equipment and offer a wide range of products and customized services to all the valuable clients in a number of specifications and at an industry leading price. All the tools are reliable and come from hi-tech manufacturing units and certified vendors with quality assurance as per Industry standards.

Contact Information and Delivery Services

With the motto of “Quality products at an affordable price” at Nasif and KhanSahib, you are offered more than superior quality because they also provide a comprehensive risk management, world-class training programs and a team dedicated to customer support and satisfaction. They have a dedicated staff and vehicles to offer delivery services to their clients within the kingdom of Bahrain. You can anytime walk into any of the showrooms and check out the extensive range of equipment and tools, for online support and services visit http://www.nasifkhansaheb-bh.com/ and feel free to mail your queries at admin@nasifkhansaheb-bh.com.

Lifting Equipment – All about Shackles

A U-shaped piece of metal with a bolt to secure the end is a simple description of a Shackle. They come in different types, some of which we will be looking at below.

Anchor Shackle – It is used to refer to shackles that have a round ‘O’ shaped look. Usually alternately used with a Bow Shackle. A bow shackle usually has a larger bow area than that of an anchor shackle. They are designed to take the load from all directions and not stressing on one side. The larger the size of the shackle is the less it’s over strength is but it does take a larger strap.

Chain Shackle – They are also called D-Shackles. Its name describes its ‘D’ shape. These shackles are narrower than Anchor or Bow Shackles. They are designed to take more load and mainly in line. They might not support side loads and may result in twisting or bending. They have a threaded pin.

Stainless Steel Shackles – These shackles are usually preferred for marine applications. They come in various grades. They are resistant to corrosion, ocean water spray and can take extreme conditions or moisture.

Galvanized Shackles – Very similar in quality to Stainless Steel Shackles, it is protected from rust and corrosion too. They are generally used for Industrial Purposes. It has a coat of zinc oxide to protect itself from oxidization. Even though it is as durable and strong as the stainless steel shackles, it is still less pricey.

Types of Pins – The pin type helps in deciding for that purpose the shackle is ideal to be used. They come in different types like Captive Pins, Screw Pins, Round Pins, and Bolt Pins. Bolt Pins are usually used for heavy loads because they secure well with a nut/bolt. Screw Pins are easy to secure and remove making it ideal for most purposes and easy to use. Captive Pins cannot be separated from the bow and this type is most ideal for marine applications as the risk of dropping or losing the pins in the water is high and this can be avoided by using Captive Pins.

If you are looking for good quality shackles or any kind of lifting equipment, do check Nasif and Khansaheb Abdulhusein Bros. They deal with all sorts of lifting equipment from all kinds of ropes to fall arrest protection. Visit their website http://www.nasifkhansaheb-bh.com for more details.

Wrenches Necessary for Your Toolbox

At Nasif Khan Saheb& Co., we deal in a variety of world class wrenches suitable for home and industrial tool boxes for large and small uses in Bahrain

The wrench is the most basic and significant part of any man’s toolbox. Although it may seem like a basic tool, different types of the wrench are meant for specific purposes. The basic use of a wrench is to either loosen or tighten items like nuts and bolts by rotating them in opposite directions. This is done by applying torque on the item by the wrench. With many different types, wrench proves to be the most significant tool. Here are some necessary wrenches necessary for your toolbox:

 Open-end wrench

This wrench is the most common and usually is found in the toolbox of every professional. It is double-ended with openings of different sizes for opposite faces of nuts or bolts. The openings are of the U-shape, which helps provide adequate grip for objects while turning it. This wrench is easy to use and can fit in any small or loose spaces where other larger wrenches may not reach.

Box-ended Wrench

A box-ended wrench has a closed hexagonal-shaped loop at both the ends. Both the loops are of different sizes, and they may also be designed to fit a square shape. Where open-ended wrenches fail, these wrenches excel.

Combination Wrench

The combination wrench is another double-ended tool. It has an open-end on one side and a box-end on the other. The open-end is useful when tightening and loosening objects in small confined spaces, and the box-end provides a firm grip around nuts and bolts.  Combination wrenches generally have both the ends of the same size, as it is usually used in a particular combination.

Socket Wrench

The socket wrench fits completely over the nut or the bolt and makes the rotation more quick and efficient. Most of the sockets have a joint where the handle is attached. Due to its peculiar design, after every turn, the handle is removed and reinserted. The handles are detachable due to which sockets of various sizes can be used on the same handle. These can be used at various angles and tight spaces.

Adjustable wrench

An adjustment wrench always comes in handy as the size of the opening can be set according to the size of the nut and bolt. An adjustable wrench is also known as a crescent wrench.

Nasib and KhansahebAbdulhusein Bros supply quality wrenches of all kinds and sizes. Tools other than wrenches can also be ordered on their website - http://www.nasifkhansaheb-bh.com/